Studer XTS

Quick Overview

The 12V-XTS inverter/charger has a continuous power rating of 500VA (650*) up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 700VA (900*), and can deliver 2.3kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current
The battery charge current can be adjusted between 0 and 35Adc

The 24V-XTS inverter/chargerhas a continuous power rating of 650VA (800*) up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 1000VA (1200*), and can deliver 2.5kVA for up to 5 seconds
The battery charge current can be adjusted between 0 and 25Adc

The 48V-XTS inverter/charger, has a continuous power rating of 750VA (900*) up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 1200VA (1400*), and can deliver 2.8kVA for up to 5 seconds
The battery charge current can be adjusted between 0 and 12Adc

* Additional power with the ECF-01 fan module, as an option.

Options

RCC-02, RCC-03 remote control and programming center

battery status processor BSP

communication module Xcom-232i, equipped with a serial port RS-232

communication sets by internet with Xcom-LAN / Xcom-GSM

communication module Xcom-SMS

multi-protocol communication module Xcom-CAN

and more..

For more information, see Studer's Website

Customize Studer XTS
Your Customization
Image
Studer XTS

In stock

€ 28.85

Summary

    A well-rounded yoga workout takes more than a mat. The Sprite Yoga Companion Kit helps stock your studio with the basics you need for a full-range workout. The kit is composed of four best-selling Luma Sprite accessories in one easy bundle: statis ball, foam block, yoga strap, and foam roller. Choose sizes and colors and leave the rest to us. The kit includes:

    • Sprite Statis Ball

      With its seemingly limitless programmable functions, the XTS offers unequalled flexibility compared to other products on the market.

      The inverter/charger has a continuous power rating of 500VA (650*) up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 700VA (900*), and can deliver 2.3kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.

      * Additional power with the ECF-01 fan module, as an option.

      The XTS offers a high degree of protection thanks to its IP54 housing and electronic protection against reverse polarity. 

      The battery charge current can be adjusted between 0 and 35Adc. The factory default settings include a battery charge curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charge curve can be easily adapted to other types of batteries including OPzSNiFe, Lithium and Redox Flow, to name but a few.

      The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 16Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications. 

      The Smart-Boost function allows the Xtender to assist the AC source via the inverter function. This way, the currents from both sources (AC-in and inverter) are combined to deliver the energy required by big loads if the loads are more than the AC source can supply. 

      The injection function allows the Xtender to send energy to the grid. This function is especially useful in energy storage systems where either the excess energy is injected to the grid, or a specific current is injected at a specific time of the day.

      The ARM-02 accessory is a DIN rail module with two auxiliary contacts. When connected to the XTS, it allows for all programming possibilities of the Xtender.

      The RCM-10 accessory offers a remote entry to control the inverter externally. 

      The Xtender has two auxiliary contacts, configured by default for the automatic start of a generator and the alarm function.

      In addition, the Xtender can be equipped with a remote entry, which can be used to change functions or control the system externally.

      Monitoring and control onsite or remotely is possible with the RCC-02/03 remote control or with the LAN, GSM or SMS interfaces. Detailed information on all Xtender accessories can be found on the corresponding section of the website.

      The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.

    • Features and performances

      • True sine wave voltage
      • Reliable and silent with any kind of load
      • Outstanding overload capabilities
      • Smart-Boost function for assistance to the source even with difficult loads
      • Automatic reduction of peak loads (power shaving)
      • Multi-stage programmable battery charger with PFC (Power Factor Correction)
      • Stand-by level adjustable over a large range and from a very low threshold
      • Ultra-fast transfer relay
      • Control by digital signal processors (DSP)
      • High efficiency
      • 5-year warranty
    Copyright © 2017 microtherm. All rights reserved.